People have long wanted to run the Mac OS operating system on PC hardware, specifically on Intel and AMD architectures. But despite pleas and prayers, that wish remains unfulfilled.
Although running Mac OS natively on PC hardware is not possible, there is another option--running Mac OS X on an emulator. In this article, I will show you how to install and run Mac OS X Panther on your PC using PearPC, a free, architecture-independent PowerPC platform that runs on PCs. To check out PearPC's features, go to the PearPC-PowerPC Architecture Emulator web site.
Here are the steps you'll take to use PearPC to install Mac OS X:
- Download the PearPC PowerPC Architecture Emulator.
- Obtain hard disk images for use with PearPC.
- Obtain images of your client OS installation disk.
- Configure PearPC to use the hard disk image and the OS images.
Download the PearPC PowerPC Architecture Emulator. Once it's downloaded, extract its content to a folder, say, [Desktop]:\PearPC. This is the folder that is going to contain all of the files you'll see in the next couple of sections.
Note: [Desktop] refers to the path of my Windows desktop; that is, C:\Documents and Settings\Wei-Meng Lee\Desktop\.
Hard disk images
To install Mac OS X on the emulator, you need a hard disk image. You can download preformatted hard disk images from http://pearpc.net/downloads.php. Two disk sizes are available: 3GB and 6GB. If you plan to install the full Mac OS X, then use the 6GB image. If you have limited disk space on your hard drive, use the smaller, 3GB image. Be aware that the default install of Mac OS X takes up a little more than 3GB, and so you need to unselect certain components during installation if you use the 3GB image.
The disk images come in two formats: BZ2 and RAR. I used the 6GB RAR disk images. You need to uncompress the disk image before you can use it. To uncompress the RAR image, I used WinRAR from http://www.rarlab.com/download.htm. Uncompress the image and save it in the [Desktop]:\PearPC folder.
Making images of your client OS
To install Mac OS X on your hard disk image, you need to make copies of your Mac OS X installation disk in ISO format. You can use Nero or any other disk utility to save CDs or DVDs in ISO format. In my case, I have saved the images in the C:\PearPC folder. I have named the first disk
Note: You need to purchase Mac OS X in order to run Mac OS X in PearPC.
Once you've taken the previous steps, you're ready for the final step: configuring PearPC to use the all the relevant disk images. To do it, you need to create a configuration file. You can find the instructions on how to create one manually at http://pearpc.net/guides.php?guides_id=2. Or you can download a Windows application that does all the hard work for you. In my case, I used the PearPC Control Panel to help me manage my Mac OS X emulation.
Launch PearPC Control Panel and click on the Create New Configuration File icon. You will see the first screen as shown in Figure 1. Click on Continue to proceed to the next step.
Figure 1. Using the Create Configuration File wizard
In the next screen, you have to supply a few pieces of information (see Figure 2). First, specify the location of the PearPC emulator. In my case, it is [Desktop]:\PearPC\ppc.exe.
Next, specify the location of the hard disk image; that is, [Desktop]:\PearPC\macosx_6gb.img.
Note: Be sure to replace [Desktop] with your own desktop path.
Also, set the amount of memory you want to set aside for Mac OS X. (I have allocated 255MB.) Click on Continue.
Figure 2. Creating a new configuration file
In the next screen, you have the option to specify the screen resolution and color depth to use. Click on Finish when done (see Figure 3).
Note: I tried to enable networking, but I never got it to work. Also, use G3 and not G4 CPU emulation.
Figure 3. Specifying additional options
Give a name to the configuration file and save the file in the location specified (see Figure 4). Name it
Mac OS X Panther and save it in the location [Desktop]:\PearPC\macosxpanther.cfg. Click on Finish.
Figure 4. Completing the wizard
You should now see the icon for your Mac OS X Panther in the PearPC Control Panel (see Figure 5). You need to complete one final step before you start installing Mac OS X on your PC--check the "CD-ROM device is installed" option and specify the location of the Mac OS install disk image. In my case, it is [Desktop]:\Panther1.iso. This is the image that will be used to boot up the emulator.
Figure 5. The completed configuration file
Figure 6 shows the files in my [Desktop]:\PearPC folder. The important files are highlighted.
Figure 6. Files in the PearPC folder
That's it! Double-click on the Mac OS X Panther icon and you should see the PearPC 0.3.0 window pop up (see Figure 7). Your Mac OS X installation should start soon afterward.
Note: It took me quite a while to get my Mac OS X to install. I encountered a number of failed attempts--when I booted into Mac OS X, it prompted me to restart my machine. But after several attempts, it worked.
Figure 7. Installing Mac OS X
Once the OS is installed, you will be asked to restart the machine. For subsequent attempts to run Mac OS X on your emulator, you should uncheck the "CD-ROM device is installed" option so that it can boot directly from the hard disk image. If the installation is performed correctly, you should see something like Figure 8 when Mac OS X boots up.
Figure 8. Mac OS X booting up
Figure 9 shows I am having fun with my newly installed Mac on my PC.
Figure 9. Running Mac OS X on a PC!
And if you still doubt if I am really running Mac OS X on my PC, Figure 10 will prove it to you.
Figure 10. Running Mac OS X in my Windows XP PC
Before installing PearPC and using Mac OS X, you need to keep several things in mind:
- You need a license to run Mac OS X. That is, you need to buy a copy of Mac OS X.
- The installation process takes time. Don't install Mac OS X on a slow machine; I tried the steps outlined in this article on three different machines--933MHz, 1.7GHz, and 3.0GHz, all equipped with 512MB of RAM. The 3.0GHz machine installed significantly faster compared with the rest, but it still took me several hours to get all of the installation done. Also, make sure you have lots of free hard disk space. The hard disk image itself takes up 6GB, and the additional installation disk images are going to take up a few more gigabytes.
- Even though the installation process is painfully slow, once the system is installed it is actually quite responsive. While you won't be able to fully experience Mac OS X as if you were using a real Mac, the emulation provides a good way for you to try out Mac OS X before you head to the nearest Apple shop to get the latest iMac.
Have fun, and let me know if PearPC works for you.